{"id":2743,"date":"2026-05-07T09:09:51","date_gmt":"2026-05-07T01:09:51","guid":{"rendered":"http:\/\/www.serma-tech.com\/blog\/?p=2743"},"modified":"2026-05-07T09:09:51","modified_gmt":"2026-05-07T01:09:51","slug":"how-to-drain-a-6-person-outdoor-spa-4274-f12e43","status":"publish","type":"post","link":"http:\/\/www.serma-tech.com\/blog\/2026\/05\/07\/how-to-drain-a-6-person-outdoor-spa-4274-f12e43\/","title":{"rendered":"How to drain a 6 – person outdoor spa?"},"content":{"rendered":"

Hey there! I’m a supplier of 6-person outdoor spas, and I get a ton of questions about how to drain these bad boys. It’s not as complicated as it might seem at first glance, but there are definitely some steps you’ll want to follow to make sure you do it right. So, let’s dive in and go through the process step by step. 6 Person Outdoor Spa<\/a><\/p>\n

<\/p>\n

Step 1: Gather Your Tools<\/h3>\n

Before you start draining your 6-person outdoor spa, you’ll need to gather a few tools. You’ll need a submersible pump, a garden hose, and a bucket. The submersible pump is going to be your best friend here. It’ll help you get the water out of the spa quickly and efficiently. The garden hose is for directing the water to where you want it to go, and the bucket is just in case you need to scoop out any remaining water.<\/p>\n

Step 2: Turn Off the Power<\/h3>\n

This is a no-brainer, but it’s super important. You don’t want to be working on a spa that’s still connected to the power. It’s a major safety hazard. So, before you do anything else, find the breaker box and turn off the power to the spa. Make sure you double-check that it’s off by trying to turn on the jets or any other features. If nothing happens, you’re good to go.<\/p>\n

Step 3: Remove Any Accessories<\/h3>\n

Take out any accessories that are in the spa, like pillows, filters, and any other loose items. You don’t want these getting in the way when you’re draining the water. Also, it’s a good idea to clean these accessories while the spa is being drained. You can use a mild soap and water to clean them, and then let them dry completely before putting them back in.<\/p>\n

Step 4: Locate the Drain Valve<\/h3>\n

Most 6-person outdoor spas have a drain valve located at the bottom of the spa. It’s usually a small valve that you can turn to open or close. Sometimes, it might be covered by a panel or a cap, so you’ll need to remove that first. Once you’ve located the drain valve, make sure it’s in the closed position.<\/p>\n

Step 5: Connect the Pump and Hose<\/h3>\n

Now it’s time to connect the submersible pump to the garden hose. Make sure the connection is tight so that there are no leaks. You can use a hose clamp to secure the connection if you need to. Once the pump and hose are connected, place the pump inside the spa. Make sure it’s sitting on a flat surface and that the intake is submerged in the water.<\/p>\n

Step 6: Start the Pump<\/h3>\n

Once the pump is in place, you can turn it on. The pump will start sucking the water out of the spa and through the hose. You’ll want to direct the hose to a suitable drainage area, like a lawn, a sewer drain, or a dry well. Make sure the area can handle the amount of water that’s going to be drained.<\/p>\n

Step 7: Monitor the Drainage<\/h3>\n

While the pump is running, keep an eye on the water level in the spa. You’ll want to make sure the pump doesn’t run dry, as this can damage the pump. If the water level gets too low, you can stop the pump and move it to a different spot in the spa to continue draining.<\/p>\n

Step 8: Drain the Remaining Water<\/h3>\n

Once the pump has removed most of the water, there will still be some water left in the spa. You can use the bucket to scoop out the remaining water. Make sure you get all the water out, especially in the corners and around the edges of the spa.<\/p>\n

Step 9: Flush the Spa<\/h3>\n

After you’ve drained all the water, it’s a good idea to flush the spa. You can do this by filling the spa with fresh water and then draining it again. This will help remove any remaining dirt, debris, or chemicals from the spa.<\/p>\n

Step 10: Clean the Spa<\/h3>\n

Once the spa is drained and flushed, it’s time to clean it. You can use a mild spa cleaner and a soft brush to clean the inside of the spa. Make sure you clean all the surfaces, including the walls, the floor, and the jets. Rinse the spa thoroughly with clean water after you’re done cleaning.<\/p>\n

Step 11: Replace the Filters<\/h3>\n

While the spa is being cleaned, it’s a good time to replace the filters. Filters are an important part of keeping your spa clean and healthy. Make sure you use the correct filters for your spa. You can usually find the filter specifications in the owner’s manual.<\/p>\n

Step 12: Refill the Spa<\/h3>\n

Once the spa is clean and the filters are replaced, it’s time to refill the spa. You can use a garden hose to fill the spa with fresh water. Make sure you fill the spa to the recommended water level, which is usually marked on the inside of the spa.<\/p>\n

Step 13: Turn On the Power<\/h3>\n

After the spa is filled with water, you can turn the power back on. Make sure all the settings are correct, and then turn on the jets and any other features. Let the spa run for a few minutes to make sure everything is working properly.<\/p>\n

Step 14: Add Chemicals<\/h3>\n

Once the spa is running, it’s time to add the necessary chemicals. You’ll need to add chlorine or bromine to keep the water clean and free of bacteria. You can also add other chemicals, like pH balancers and alkalinity adjusters, to keep the water chemistry in balance. Make sure you follow the instructions on the chemical packages carefully.<\/p>\n

Step 15: Enjoy Your Spa<\/h3>\n

Now that your 6-person outdoor spa is drained, cleaned, refilled, and ready to go, it’s time to sit back, relax, and enjoy it. Invite your friends and family over for a soak, and have a great time.<\/p>\n

Conclusion<\/h3>\n

<\/p>\n

Draining a 6-person outdoor spa might seem like a daunting task, but it’s actually pretty straightforward if you follow these steps. By taking the time to drain and clean your spa regularly, you’ll keep it in good condition and ensure that it lasts for many years to come.<\/p>\n

7-8 Person Outdoor Spa<\/a> If you’re in the market for a 6-person outdoor spa, or if you have any questions about draining or maintaining your spa, don’t hesitate to reach out. I’m here to help you make the most of your spa experience. Whether you’re a first-time spa owner or a seasoned pro, I can provide you with the information and support you need. So, get in touch, and let’s start the conversation about your next outdoor spa adventure.<\/p>\n

References<\/h3>\n